曙海教学优势
本课程面向企事业项目实际需要,秉承二十一年积累的教学品质,2019 ANSYS WB FEA 静力学+运动学培训以项目实现为导向,老师将会与您分享设计的全流程以及工具的综合使用技巧、经验。线上/线下/上门皆可,2019 ANSYS WB FEA 静力学+运动学培训专家,课程可定制,热线:4008699035。
大批企业和曙海
建立了良好的合作关系,合作企业30万+。曙海的课程培养了大批受企业欢迎的工程师。曙海的课程在业内有着响亮的知名度。
Courses
|
English Description
|
Agenda
|
ANSYS Mechanical Basic机械结构
|
This training course covers the basics of using ANSYS Mechanical
in performing structural and thermal analyses. It is intended for all new or occasional ANSYS Mechanical users, regardless of the CAD software used. Course Objectives: – General understanding of the user interface, as related to geometry import, meshing, application of loads and supports, and post processing – Procedure for performing FEA simulations, including linear static, modal, and harmonic structural analyses and nonlinear steady-state thermal analyses – Utilizing parameters for ‘what-if’ scenarios • Training Courses are also available covering the use of other Workbench modules -Fatigue (e.g. Design Modeler, Design Exploration, etc.) |
Lecture – Introduction Lecture – Chapter 2: Mechanical Basics
Workshop 2.1 Lecture – Chapter 3: General Preprocessing Workshop 3.1 Lecture – Chapter 4: Meshing in Mechanical
Workshop 4.1 Lecture – Chapter 5: Static Structural Analysis Workshop 5 Workshop 5.2 Lecture – Chapter 6: Modeling Connections Workshop 6.1 Lecture – Chapter 7: Remote Boundary Conditions Workshop 7.1 Lecture – Chapter 8: Multistep Analysis Workshop 8.1 Lecture – Chapter 9: Vibration Analysis Workshop 9.1 Lecture – Chapter 10: Thermal Analysis Workshop 10.1 Lecture – Chapter 11: Results and Post processing Workshop 11.1
Lecture – Chapter 12: CAD and Parameters Workshop 12.1
Lecture – Chapter 13: Thread Workshop 13.1
Lecture – Chapter 14: Fatigue Workshop 14.1
Lecture – Chapter 15: O-ring Workshop 15.1
Lecture – Chapter 16: Rigid Dynamic Workshop 16.1
|
ANSYS Mechanical Rigid Body Dynamics
|
Rigid Multibody Dynamics
•Consists only of rigid bodies
•Motion due only to joints/contacts
•Goal is determination of Motion and Forces
•Few degrees of freedom, fast solves
•Best suited for short duration large deformation analysis
•Can be performed by “Rigid Dynamics” analysis system
•Large deformation and large rotations capabilities
•Contact shock (energy restitution)
•Based on energy conservation
|
Lecture 1: Introduction to ANSYS Multibody Analysis
Lecture 2: Rigid Dynamics procedure
Workshop 1 –Rigid Body Basics
Workshop 2 –Applying Motion Loads in Structural Analysis
Lecture 3: Connections
Workshop 3 –Elevator Device
Workshop 4 –Using the Assemble and Stops Features
Workshop 5 –Constraint Equations
Workshop 6 –Gear Backslash
Lecture 4: Transient Structural Analysis
Workshop 7 –Transient Structural Analysis of an Engine Assembly
|